Dekorodal
(hydroinsulation bitumen tape)
DEKORODAL is a hydroinsulation tape, resistant to lye and acids. It is effective at temperatures from –11oC to 120oC. DEKORODAL tape is used for the protection of buried water or gas pipes, cable installations, cisterns, reservoirs, as well as the hydroinsulation of building foundations.
HOW TO USE:
Remove rust from the surface to be treated. Apply a thin layer of BITOSIL to the dry surface. This helps to achieve an even bond with the tape while providing anticorrosive protection. When working below 20oC, it is necessary to heat the object over an open flame, which achieves higher thermoplasticity. When wrapping the tape make sure to leave about a 10% overlap.
PACKAGING:
DEKORODAL tape is available in widths of 5, 10, 15, and 100 cm.
STORAGE:
Store DEKORODAL tape in a cool and dry place. Do not store in direct sunlight, because the tape will melt, making it difficult or impossible to use.
CHARACTERISTICS:
- does not contain tars or phenols
- resistant to lye and acids
- effective at temperatures between –11oC and 120oC
- penetration 46
- provides alkaline reaction
-
electric penetration:
|
For alternating penetration tension |
One layer of insulation |
20,000 V |
Two layers of insulation |
33,500V |
Measurements of electric penetration were performed at the Milan Vidmar Institute of Electronics.
WARNING!
Always wear protective clothing and gloves when working with DEKORODAL (S 36/37). Clean tools used with BITOSIL with white spirits or nitro thinner.
For more information or clarification please contact our technical department at+386 1 286 20 87.
